Delivery Cost To SA
iBuild delivers kit homes across South Australia from our six capital-city distribution points: Sydney, Melbourne, Brisbane, Perth, Adelaide and Hobart. Locations we deliver to include Adelaide, Mount Gambier, Port Augusta, Port Lincoln, Port Pirie, Victor Harbor, Whyalla, Ceduna, the Adelaide Hills and the Barossa Valley.
Delivery is charged once, at $900 + GST per 100 km zone measured from your nearest distribution point – in most cases Adelaide. Delivery within the Adelaide metro area (up to 100 km) is $900 + GST. Every other standard land-freight delivery for your kit – up to 9 staged deliveries for a full kit – is at iBuild’s cost, to your kerbside where access permits, or otherwise to the nearest accessible point. The more of your kit you order, the further that one charge stretches.
For some sites in south-east South Australia, our Melbourne distribution point may be closer. We will confirm the best option when we quote your delivery.
Estimated delivery costs in the table below exclude GST. They are provided for budget planning only and are subject to confirmation at the time of placing your order and arranging delivery. Barge, ferry, island transfer and other special-access freight are additional. Terms and conditions apply.
See all delivery zones and rates, including our delivery cost estimator.
| Destination | State | Nearest iBuild Distribution Point | Estimated Distance(km) | Zone | Estimated Delivery Cost($) |
|---|---|---|---|---|---|
| Adelaide | SA | Adelaide, SA | 100 | 1 | 900 |
| Adelaide Hills | SA | Adelaide, SA | 40 | 1 | 900 |
| Barossa Valley | SA | Adelaide, SA | 67 | 1 | 900 |
| Ceduna | SA | Adelaide, SA | 467 | 5 | 4500 |
| Mount Gambier | SA | Melbourne, VIC | 430 | 5 | 4500 |
| Port Augusta | SA | Adelaide, SA | 302 | 3 | 2700 |
| Port Lincoln | SA | Adelaide, SA | 645 | 7 | 6300 |
| Port Pirie | SA | Adelaide, SA | 222 | 3 | 2700 |
| Victor Harbor | SA | Adelaide, SA | 95 | 1 | 900 |
| Whyalla | SA | Adelaide, SA | 379 | 4 | 3600 |
Delivered Flat-Pack, in Up to Nine Deliveries
Every iBuild kit travels flat-packed to your kerbside wherever access permits. A full kit order may involve up to nine deliveries, each timed to your construction progress and never before you are ready to receive it.
- 1Floor Kit Optional
- 2Frames & Trusses
- 3Windows
- 4Roofing
- 5Cladding & External Doors
- 6Plasterboard
- 72nd Fix
- 8Kitchen
- 9Front of Wall / PC Items
Optional The Floor Kit is only needed for a raised floor; it is not required where the home is built on a concrete slab. Nine is the full kit – if you don’t order all four kits, you’ll have fewer deliveries. Your own schedule confirms which apply and when.
Crane truck as standard
Good site accessMost deliveries arrive on a truck-mounted crane, which lifts each bundle off the tray and sets it down within reach – no unloading equipment needed from you.
Semi-trailer by arrangement
Challenging site accessWhere a load is long or a crane truck can’t get in, a semi-trailer can be arranged instead. If the site can’t be reached at all, we deliver to the nearest accessible point or a local depot. Tell us early if access is tight, low, steep or unsealed.
Receiving the load
Either way, have someone on site to check the bundles against the docket, then keep them off the ground, level and covered until installation.
Barge, ferry, island transfer and other special-access freight are additional. Terms and conditions apply.
